LW15right
LW15leftLW15left2LW15rightLW15right2LW15right3New Frontier Armory
LW-15 
Top View

LW-15 Complete Polymer Lower Receiver

5 out of 5 based on 8 customer ratings
(8 customer reviews)

$129.99

  • Manufacturer: New Frontier Armory
  • Model: LW-15 Complete Polymer Lower Receiver
  • Caliber: Multi
  • THIS ITEM MUST SHIP TO AN FFL
  • -Bulk Qty Discount Available at 25+ and 100+ Units
  • -Discount will appear in your cart when logged in
  • -Dealer Price will appear in cart when logged in

In stock

SKU: LW15LOWER-C Category: Tags: , , ,

Product Description

LW15right

** ALL UNITS SHIPPED AFTER 5/23/2016 will be upgraded to MILSPEC Receiver Extensions and Stock Bodies!

New Frontier Armory LW-15 Complete Polymer Lower Receiver

Manufacturer: New Frontier Armory

Model: LW-15

Type: Semi Automatic AR-15 Lower Receiver

Caliber: Multi

Magazine: Accepts any standard MIL-SPEC AR-15 magazine

Weight (unloaded): 26.1 oz

Other Specifications and Features of the New Frontier Armory LW-15 Complete Polymer Lower Receiver:

  • Pictogram style “SAFE” and “FIRE” markings
  • Caliber marking of “Multi” so it can be used with many different caliber uppers
  • MILSPEC receiver extension and stock
  • Compatible with all standard AR-15 components and magazines **
  • Manufactured to MILSPEC dimensions on state of the art injection molding machines and CNC equipment for consistent quality parts and exacting tolerances
  • Lightest most durable composite polymer lower on the market today
  • Reversible safety to accommodate left or right hand shooters
  • Low maintenance / easy cleaning / scratch resistant
  • “Zero Slop” fit eliminates the need for wedges — designed for an extremely tight fit at upper lug attachments in front and rear
  • Lifetime warranty against any manufacturer defects when used as directed
  • Save money by building your own AR-15 rifle from the ground up exactly the way you want it configured

**The LW-15 Complete Polymer Lower Receiver is designed to be used with the New Frontier Armory polymer lower parts kit also available on this site.  Standard MIL SPEC lower parts may require some modification and fitment of the lower.  All holes should be fitted carefully and will vary due to tolerances in the lower parts kits from one manufacturer to another.  Warranty is null and void once any modifications are made to the lower from factory configuration.

*NOTE:  Some .22LR, 9mm and other blow back style upper receivers use a groove in their BCG that is too narrow for the polymer hammer that comes standard on the New Frontier Armory LW-15 complete polymer lower receiver.  In these cases you will need to switch to a blow back style hammer available by clicking HERE.  The blow back style hammer, once installed, will run all rim fire and pistol uppers, and still work fine with standard mil-spec rifle uppers.

OPTIONS:  The New Frontier Armory LW-15 Complete Polymer Lower Receiver  is also available in a Shockwave Pistol version .  Also, for our California customers, you can order a Patriot Mag Release Kit by clicking HERE if your dealer requires it.

AVAILABLE ACCESSORIES: Blow Back Hammer for use with .22 caliber uppers

 

The New Frontier Armory LW-15 Complete Polymer AR-15 lower receiver is proudly MADE IN THE USA by hard working American men and women and is covered under a lifetime warranty against manufacturer defects when used as directed.

 

FIREARM WARNING:

This is a serialized item considered to be a firearm by BATFE.  This item must be shipped to a Federal Firearm License (FFL) holder.  All BATFE, GCA & NFA rules apply!  This item must be shipped to a Federal Firearm License (FFL) holder.  You will be prompted during checkout to pick an FFL to ship to in your area using our FFL Locate tool. YOU will be responsible for checking with your local FFL to ensure this weapon is legal in the state that you reside and that they will accept this weapon on your behalf and transfer it to you.  New Frontier Armory, LLC will NOT be responsible for any shipping or admin charges incurred by packages not being accepted by the FFL you choose during checkout.

 

Additional Information

Weight 1.72 lbs
Dimensions 17.5 x 7.25 x 2.5 in

8 reviews for LW-15 Complete Polymer Lower Receiver

  1. 5 out of 5

    :

    I mated a Precision Firearms Orion 6.8 SPC upper to the LW-15 Lower. It was an admittedly tight fit and I had to try a couple of different lowers at the dealer as the fit was so tight. No Accu Wedge needed here. Lightweight, tight fit. I use the carbine for whitetail deer hunting, home defense and target shooting. The trigger seems to have minimal creep (I have a Gisselle SSA in my Bushmaster). I may replace the pins someday as I just seem uncomfortable with the polymer pins, but I am in no hurry.
    I would defiantly recommend this to other shooters to try

  2. 5 out of 5

    :

    I have had this lower(Cali model) for a little over a year now. Maybe 1000 – 1200 rounds down range and not one ftf or fte. The lower has yet to show any discernable wear. Fire control group really cleans up after about 200 rounds. I have it matched to a PSA 16″ M4 Premium Upper which mates together as if made for one another. I have two other complete PSA AR m4’s, uppers and lowers. I must admit that this NFA lower matches to the other two uppers just as tight as the upper its mated with, and functions as well as my PSA billet lowers. I will now be buying another NFA lower to mate to a 7.62 x 39 upper. Must admit I was skeptical about a poly lower, but I would defiantly recommend this as a great base for an AR build.

  3. 5 out of 5

    (verified owner):

    I have two of the NFA Polymer lowers and they both fit excellently with my five upper receivers. I was really impressed with how the trigger group preformed. The first receiver I mated with CMMG dedicated 22 LR upper and found it worthy of any caliber suited to the AR platform. So I purchased another for a 300 Blackout build. I decided to replace the polymer part with standard metal parts, just because I wanted to make the comparison.
    I emailed NFA and asked if I would encounter any fit problems. They quickly replied and said that if I sent them the receiver they would do the install for the price of the parts and explained that there would be some fitting and on what pats might need it. I decided to take on the challenge and do it myself. Here is what was found.
    The blot catch doesn’t need replaced because it is already metal but the detent on the end of the spring is polymer. I changed it to metal.
    The first receiver only needed some cleaning up of the magazine catch to get it to operate without sticking. Everything else went together like any Mil Spec receiver.
    The second one needed a little more fitting. The magazine catch was the same as the first receiver. I also need to spin a ¼” drill bit, with my fingers NOT a powered drill, to clean up the edges of the holes in the take down and pivot pin holes. I had to use a drill bit on the pivot pin spring and detent hole because it wasn’t deep enough to compress the spring and detent so I could install the pin. And again use your fingers to twist the drill bit it didn’t take but several thousands to get it to fit.
    I also had to take a few thousands off the rear edge of the magazine well to get the Pro- Mag polymer magazines to seat with the new catch. I used a DPMS & ALG triggers with JP 3.5 springs, giving them a 4.5 to 5 lbs. triggers.
    All in all I think the NFA LW-15 is a very well made and highly serviceable for the AR platform no mater what caliber you choose.

  4. 5 out of 5

    :

    I’ll keep it short and sweet. You do not have to spend 1200 dollars to get a quality ar. I thought I had a problem with the NFA lower, As I was on the phone with NFA I found it was an adjustment. The lady on the line was very nice and helpful. I can not say enough good things about NFA’s GREAT people. PSA upper NFA lower, 1200-1500 rounds with O problems. I will be using NFA for my next couple of builds. Thanks Dan K.

  5. 5 out of 5

    :

    I purchased 4 of the NFA LW-15 a year and half ago and they are AWESOME!
    Approx. 1500-1750 rounds shot and NOT A SINGLE PROBLEM!

    I have built the following:
    AR57 upper (5.7x28mm) top load eject’s spent cartridge down magazine hole.
    Colt A3 Upper
    DPMS Oracle Upper

    All three are fantastic builds.
    Weight is excellent.
    Trigger is smooth.
    Actions and feed are excellent.

    Waiting on the fourth… thinking of going with a .308 build on it… but have not decided.
    Groups are spot on – 10 shots in half-dollar or less.

    Cost to build 1/2 or less than pre-built arms.

    Slyvnr

    • :

      Thanks for the feedback Kevin, we’re glad you’re happy with it!

  6. 5 out of 5

    :

    I was on the fence for a long time in regards to purchasing the NFA Polymer lower sue to other sites claiming lack of strength/durability. I went in and purchased a 5 pack and split with up a buddy. I can say in the last 2.5 years of heavy shooting on all 5 lowers, we have not had a single issue. That says a lot about the quality and consistency of manufacturing. We are running a range of uppers from 10″ barrel pistol setup to 24″ long range upper. We are not easy on these things by any means. The weight reduction is a huge plus. Running DPMS, Rock River Arms and other brand uppers, all perfect fitment. I will be purchasing more when back in stock!

    Thank you NFA for an awesome product.

    ~ Ryan

  7. 5 out of 5

    :

    I wanted to wait a bit before writing a review. You just can’t give honest feedback with something so new. So, now that I’ve had this thing for a couple of years, I feel I can give an honest, as well as informed, opinion on the product. I FREAKING LOVE THIS THING!
    I set about building a bargain rifle. Which I did. Since then I’ve changed out a lot of the components and turned it into a pretty decent lightweight patrol carbine, But first…
    I actually put the rifle into a stressed position for six months to see how resilient this polymer lower really is. I changed the temperature up and down rapidly, and the humidity as well. Just being thorough. To this day it still functions flawlessly! I love the polymer lower kit in this thing too. The trigger is sharp and crisp, with a short reset and it doesn’t creep at all. Don’t let the, “plastic,” parts fool you. It may look like an airsoft or toy, it is not! It is a precision crafted machine.
    Is it perfect? No, of course not. I do have a few minor issues with it. The hammer that’s included will work with milspec BCGs, but some others have a tolerance issue. Not a big deal, just a minor issue. I swapped the grip for something a little more ergonomic and had to drop an extra roll pin in there to make the safety engage. The pivot and take-down pins are so stiff that I need a punch to remove them. Again, not a huge issue, but it is an issue. None of these things would prevent me from buying another, or recommending one to a friend on a budget.
    All in all, this is the BEST VALUE on a lower that I have found anywhere in the market. And as soon as NFA starts making this thing in FDE, I’m buying another!

  8. 5 out of 5

    :

    I have owned this lower for about 3 years now. this thing is awesome! I have put around 5000 rounds in to it and its still kicking. The blow back hammer is getting a detente in it. I would like to say good job NFA. Also the Customer support was awesome. I had a problem with my rifle when i 1st built it. It was the upper. I did kill my Magazine Catch after or around 4000 rounds Plus Drills. Most people well be lucky to hit 2000 rounds in the lifetime of there lower I replaced it with Metal Magazine Catch. it was like 10$.

Add a review